DESCRIPTION AND USES
Rust-Oleum Color Spark Interior Paint & Primer brings your vision to life with a paint that protects your home from the chaos of everyday life. Our advanced formula resists scuffs, scratches, and marks and is mold/mildew resistant† to keep your home looking fresh and radiant for years to come. Easily wipe away messes without excess scrubbing or effort to keep your surface spotless.
But protection goes beyond the surface. Rust-Oleum Color Spark’s exceptional hiding power effectively conceals imperfections while providing a flawless, uniform finish. Our smooth application and self-leveling paint make your painting project simple. Rust-Oleum Color Spark transforms and protects your interior space to give your home the spark it deserves.
†This product contains a mildewcide to prevent the growth of mold & mildew on the paint film only.
PERFORMANCE CHARACTERISTICS
• Superior application experience, performance, and durability
• Excellent adhesion with ultra-smooth, stain blocking coverage
• 100% Acrylic
• Mold & Mildew Resistant
• Water Repellant
• Excellent scuff and burnish resistance
• Low VOC
PRODUCT APPLICATION
READ ALL DIRECTIONS BEFORE BEGINNING PROJECT
COVERAGE/WHERE TO USE
One gallon will cover up to 400 ft2 depending on surface texture, porosity, and application method. Dark colors may require multiple coats. Ideal for interior walls, trim, windows, and doors. Use on drywall, masonry, wood, or cured plaster. NOTE: Not recommended for use on floors or exterior surfaces.
SURFACE PREPARATION
Surface must be clean and free of any dust, grease, oil, stains, rust, or any other contaminants. Sand glossy surfaces before painting and wash walls if necessary. Allow wall to dry before painting. Fill in any cracks or holes to ensure a smooth surface. Drywall joint compound must dry for two days. Allow new plaster to cure for 30 days before painting. New drywall and bare wood should be primed before painting. We recommend using Zinsser® Bulls Eye 1-2-3 ® when painting over contrasting colors or bare drywall, wood, or metal. Additionally, Zinsser Bulls Eye 1-2-3 can be used to increase adhesion on hard to stick to surfaces, such as enamel paints and varnishes, paneling, and laminates.
NOTE: Not recommended for use on floors or exterior surfaces.
APPLICATION
Stir well before use. Intermix cans of the same color and product to ensure color consistency. Apply using a high quality 3/8”-1/2” nap roller or a high-quality brush. If using an airless sprayer, follow manufacturer's instructions for use, and use a .013”-.017” tip at 1800-2300 psi, adjusting as needed. Apply using even strokes, moving from dry to wet areas, keeping a wet edge. Two coats are required for new or uncoated surfaces. Some colors may require additional coats. Thinning is not recommended.
DRY AND RECOAT TIMES
Based on 77°F (25°C) <50% humidity, dries to the touch in one hour. May be recoated after four hours. Allow more time to dry at cooler temperatures or in high humidity.
CLEAN-UP
Clean hands, tools, spills and splatters with soap and warm water. Wipe up splatters before they dry. Follow manufacturer’s directions to clean spray equipment.
DISPOSAL
To dispose of empty containers and unused product, contact your local environmental regulatory agency.
MAINTENANCE CARE
Do not place objects on painted surfaces until thoroughly dry. Freshly painted surfaces may be washed after 30 days. Clean with mild, non-oily soap and water.
Refer to Safety Data Sheet for additional health and safety information.
PROTECT FROM FREEZING.