DESCRIPTION AND USES
Krud Kutter Graffiti Remover is a proprietary blend of biodegradable surfactants, detergents and emulsifiers that is designed to remove dried paints and stains on a variety of surfaces. It removes acrylic and acrylic enamel, aerosol paint, alkyd and polyurethane enamels, oil-based lacquers, primers, sealers, water-based enamels and also removes permanent markers, ink, lipstick, crayon and shoe dye.
Graffiti Remover is suitable for use on aluminum, brick, cinder block, concrete, fiberglass, formica, glass, metals, CMU, stainless steel, street signs, stucco, tile and terrazzo.
IMPORTANT: Test first on an inconspicuous area. May dull some painted surfaces. Not recommended for use on non-colorfast materials, woodwork, vinyl or plastic.
PRODUCT APPLICATION DIRECTIONS FOR NON-POROUS SURFACES SUCH AS SIGNS & GLASS:
Thoroughly spray area damaged by graffiti and wait 3-5 minutes. Wipe off with a clean cloth or towel. Repeat if necessary.
DIRECTIONS FOR POROUS SURFACES SUCH AS CONCRETE & BRICK:
Thoroughly spray area damaged by graffiti and wait 5-10 minutes. Use a brush to agitate and loosen graffiti. Hose off with water or use pressure washer. Repeat if necessary.
WARNING: MAY BE HARMFUL IF INHALED, ABSORBED THROUGH THE SKIN OR SWALLOWED. Mist or vapors may be irritating to the eyes, nose, throat and lungs. In case of contact with eyes or skin, flush with water for at least 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention.
KEEP OUT OF REACH OF CHILDREN.