DESCRIPTION AND USES
Krud Kutter Adhesive Remover is a water-based, biodegradable formula that is a safe, effective alternative to hazardous, solvent-based adhesive removers. Removes most glues and adhesives, carpet seam sealer, and mastic. It also removes dirt, grease, grime, heel marks and floor wax. Not recommended for varnished surfaces.
PRODUCT FEATURES
- Water-based
- Biodegradable
- Non-toxic
- Non-flammable
PRODUCT APPLICATION
DIRECTIONS
Always test on inconspicuous area first. Saturate the adhesive by applying a liberal amount directly onto the finish. Allow time for the remover to work. It will loosen most finishes in 15-30 minutes.
Test scrape a small area to see if finish is ready for removal. Scrape away the softened adhesive with a wide putty knife or scraper. Multiple coats or stubborn finishes may require repeat applications.
For final clean-up, apply onto the surface and wipe clean. Before installing new floor covering, allow surface to dry for 1 hour or more.
CAUTION: EYE AND SKIN IRRITANT. In case of contact with eyes or skin, flush with water for at least 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention.
KEEP OUT OF REACH OF CHILDREN.