DESCRIPTION AND USES
Krud Kutter Pre-Paint Cleaner is a ready-to-use formula that cleans and deglosses surfaces in one simple step. This biodegradable formula can be used in place of TSP as a surface preparation to improve paint adhesion. Removes dirt, greaser, grime, smoke, scuffs, mildew stains, crayon, old wallpaper paste and wax from painted or unpainted surfaces. Can also be used as a wall preparation prior to hanging new wallpaper.
PRODUCT FEATURES
• Cleans & Deglosses in one step
• Prepares surfaces prior to painting
• Water based, Biodegradable formula
• Contains no inorganic phosphates, hazardous solvents, environmentally harmful surfactants, bleach or ammonia
• May be painted over anytime after 10 minutes
PRODUCT APPLICATION
DIRECTIONS
Always test on an inconspicuous area first. Do not dilute, use products at full strength.
1. Spray Krud Kutter Pre-Paint Cleaner directly on surface to be cleaned. If needed, wipe away any overspray immediately.
2. Wipe off with a clean cloth, turning often to avoid smears.
3. When surface is dry to the touch (usually about 10 minutes), new paint can be applied. Repaint surface within a week to avoid resoiling.
Use caution when spraying as Pre-Paint Cleaner will degloss most surfaces it comes into contact with. Not for use on porous or non-washable wallpaper.
CAUTION: EYE AND SKIN IRRITANT. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention.
KEEP OUT OF REACH OF CHILDREN.