Our Super Glaze (epoxy) is a chemically cured epoxy that hardens through a reaction between the resin and activator in the kit.
There are a few key points to applying this product properly so that it cures and hardens consistently.
- The product is best applied between 70 - 80 degrees. Cooler temperatures can slow or prevent the chemical cure of the epoxy -
- We do state in the instructions that if working with more than one kit that it is suggested to still only mix one kit at a time.
- You also will need to have three clean cups for each kit used. Even when using the entire kit, you want to pour out and measure each component of the kit into its own cup. The two components do not have the same viscosity and you may not get equal amounts from simply pouring both bottles into the same cup. Using separate cups also allows you to scrape the inside of the cup when transferring one to the other, ensuring that the entire component is integrated properly.
- After you measure and combine the two components, you will stir for at least two minutes, then transfer the mixture to a third (clean) cup and stir for another two minutes, making sure to scrape the inside of the previous cup with a stir stick to ensure all of the material is transferred.