ROCKSOLID® Garage Coat Issue-Sticky/tacky or Uncured Coating
Description:
The coating does not fully cure, or it is still soft/sticky after 24 hours.
Cause:
• Improper mixing
• Material was cold
• Cold ambient temperatures
• Cold surface temperatures
Repair:
• Remove the uncured coating down to the clean substrate by using solvent wiping, scraping and grinding or blasting. Follow all safety precautions.
• Recoat the entire floor following Product Data Sheets.
• Never apply over uncured material.
Prevention:
Improper Mixing: Always mix the pigmented side thoroughly before bursting the pouch and adding the activator.
Cold Materials: Cold materials will result in slower than normal cure times and can affect their appearance when dry. Cold material is difficult to mix, roll out and to level out. Product should always