ROCKSOLID® Garage Coat Application Tools

When applying our ROCKSOLID® Garage Coat, a natural fiber 3'' chip brush is very helpful to cut around the edges of the floor.  A 3/8'' microfiber roller should be used for the application. (there is one roller cover already included in the kit).
Use the supplied roller cover r on a 9” roller frame to apply the coating evenly to the floor in 4’ x 4’ sections in an “M” and “W” pattern. Continue working in 4’ x 4’ sections, pouring a new ribbon 2’ away from the previous section. Use the roller
to pull the material back first; then push forward to fill in the void between sections. Overlap into the previously coated areas while taking care to avoid creating thick spots.