The Rust-Oleum HOME Interior Floor Coating system allows you to coat over a wide variety of horizontal substrates in your home including ceramic tile, porcelain tile, concrete, hardwood, laminate, vinyl, and grouted floors.
All flooring should be tested for adhesion before coating the entire floor. Clean a small 3”x3” (7.6 cm x 7.6 cm)inconspicuous area, let dry. Apply base coat over area and allow to dry for 12 hours. Take a utility knife and make an X in the coating down to the flooring. Apply a 4” (10 cm) piece of duct tape over the X and press firmly. Remove the tape with one quick pull. If more than 10% of the coating comes off, the floor will need to be sanded with 60-80 grit sandpaper before coating the entire floor.