DESCRIPTION AND USE
Rust-Oleum Stops Rust Universal Bonding Primer is a water-based, fast dry, maximum adhesion acrylic primer that firmly bonds any topcoat to difficult-to-paint surfaces, including two part epoxies. It may be used on interior/exterior surfaces such as galvanized steel, non-ferrous metals, furniture, aluminum flashings, PVC, porcelain, glazed brick, metal, wood, fiberglass and more. It flows and levels smoothly, has a very low odor and is rust inhibitive.
PRODUCT APPLICATION
READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING PROJECT
SURFACE PREPARATION
Surface must be free of any dust, grease, oil, stains, rust, or any other substances. Clean surface with soap and water, rinse and let dry. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces.
APPLICATION
Use when temperature is between 36°-90°F (2°-32°C) and humidity is below 85% to ensure proper drying. Do not apply to surfaces that exceed 200°F (93C°).
Shake or stir well and apply using a synthetic brush or roller.
NOTE: Thinning is not recommended.
DRY AND RECOAT TIMES
Based on 77°F (25°C) 50% relative humidity. Dries to the touch in 30 minutes. May be lightly sanded and/or top coated after 1 hour. For two part epoxies, wait 6 hours before top coating. Allow more time to dry at cooler temperature and higher humidity. Optimal benefits of Universal Bonding Primer are achieved when top coated within 7 days when it has reached full hardness and scrape resistance.
COVERAGE
Approximately 100 sq. ft. per quart depending on application method and surface porosity.
CLEAN UP
Clean brush and other application tools with soap and water. Clean up any drips or spills immediately.
DISPOSAL
To dispose of empty containers and unused product, contact your local environmental regulatory agency.