DESCRIPTION AND USES
Varathane Charred Wood Accelerator creates a weathered, rustic brown appearance on bare or untreated wood. It replicates the aging process that occurs in nature by reacting with the tannins of the wood to create a unique, one-of-a kind rustic brown. It works on all types of wood. The final look will vary on the wood type. This water-based formula is low odor.
Not for use on outdoor surfaces. For wood substrates only. Not recommended for floors.
PRODUCT APPLICATION
SURFACE PREPARATION
Remove any existing finishes with sandpaper or liquid stripper. Charred Wood Accelerator works best on bare or untreated wood. Prepare bare wood by sanding in the direction of the grain with #100 grit sandpaper. Remove any dust with a clean, dry rag.
TESTING COLOR
Charred Wood Accelerator reacts differently with different types of wood. To verify the final look, test Charred Wood Accelerator in an inconspicuous area first.
APPLICATION
Stir or shake material thoroughly before and occasionally during use. For best results, use at temperatures between 60ºF (16ºC) and 90ºF (32ºC). Apply with a synthetic bristle brush or foam brush. Allow Charred Wood Accelerator to sit on the wood for 30 minutes to 1 hour for the final effect. Wiping away is not required. For a lighter effect, apply product and wipe away immediately or lightly sand the finish with fine grit sandpaper once it is dry. To darken, a second coat can be applied after 1 hour. To remove Charred Wood Accelerator, apply bleach to the surface and wipe off.
PROTECTING THE FINAL FINISH
A topcoat should be applied for the best protection. Wait 2 hours for Charred Wood Accelerator to dry. For surfaces such as furniture and cabinetry, a lacquer spray can be used as the topcoat. For best results, use Watco lacquer. If you choose to topcoat with a polyurethane, first seal with Watco Lacquer spray and then apply Varathane Polyurethane. Test in an inconspicuous area first. Some topcoats may continue to react with the Charred Wood Accelerator affecting the final work.
COVERAGE
Each quart will cover up to 275 square feet.
CLEAN UP
Soap and water.