DESCRIPTION AND USES
Varathane Premium Interior Penetrating Wood Stains are formulated with a unique base for deep penetration and premium pigments for clear color. This results in a deeper, richer and more natural color for your wood projects. From floors to furniture, Varathane Classic Wood Stains are formulated not just to stain wood, but to reveal its true beauty.
This product is ideal for use on all interior projects including: furniture, cabinets, doors and trim, floors and paneling.
PRODUCT APPLICATION
SURFACE PREPARATION
Remove any existing finishes with sandpaper or stripper. Prepare bare wood for staining by sanding in the direction of the grain. Begin with #120 grit sandpaper and progress though #150, #180 and #220 grits.
Before staining, remove all sanding dust and dirt with a vacuum, tack cloth, or rag dampened with mineral spirits. For grease or glue, remove with a clean rag dampened with mineral spirits. Soft woods such as pine, fir, or maple require a wood conditioner. Use Varathane Wood Conditioner before staining.
TESTING COLOR
Be sure to test your stain to verify the desired color. To test, apply the stain in an inconspicuous area. When testing on soft wood, be sure to sand and condition the test area. To achieve a lighter color, wipe the stain immediately after application. For a deeper color, allow the stain to set for 1 hour before wiping or apply additional coats of stain.
APPLICATION
Use only when air (ambient) temperature is between 55-90°F (13-32°C) and relative humidity is below 85%. Stir the contents thoroughly to ensure any settled pigment is redispersed before application. Apply with a brush or clean, lint-free cloth. Apply the stain across the grain until the wood is saturated on top. Wipe the excess stain off in the direction of the wood grain. Do not let the stain dry before wiping off the excess. A second coat can be applied after 2 hours. Do not sand between stain coats.
COVERAGE
One quart will cover up to 150 square feet. One gallon will cover up to 600 square feet. Coverage will depend on the type of wood and porosity.
DRY AND RECOAT TIMES
Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 1-2 hours, dries to handle in 2 hours and can be recoated in 2 hours.
PROTECTING THE WOOD
Allow Varathane Classic Wood Stains to dry for 8 hours when applying an oil-based finish or 24 hours before applying a water-based finish.
CLEAN UP
Clean application tools and equipment with mineral spirits or paint thinner.