DESCRIPTION AND USES
Varathane Wood Putty is an easy to use, non-hardening wood putty. It is ideal for filling nail holes and minor defects after assembly and finishing.
PRODUCT APPLICATION
SURFACE PREPARATION
Surface must be clean and dry. Apply stain, seal or topcoat the surface before applying the putty. Allow any previously applied oil or stain on wood surface to dry 72 hours before applying Wood Putty. If sanding the surrounding area is needed, sand using 150-220 grit sandpaper and remove all sanding dust with a vacuum or a rag dampened with mineral spirits.
APPLICATION
Press putty into a nail hole or other imperfections. Wipe excess putty from the surrounding area using a plastic putty knife or a damp cloth. The putty will NOT harden to a sandable surface. Colors can be blended for custom matches. Caution: May cause skin irritation. Wash with soap and water to remove from skin.
Caution: May cause skin irritation. Wash with soap and water to remove from skin.
CLEAN UP
Clean up with soap and water.