DESCRIPTION AND USES
Varathane Wood Refresher restores and revitalizes wood floors that have become dull, faded or show signs of wear. Wood Refresher provides a clear protective coat on any solid wood floors that has been previously coated with a polyurethane, shellac, or lacquer finish. It can also be used on laminate floors when first treated with Varathane No Sanding Refinishing Prep.
PRODUCT APPLICATION
SURFACE PREPARATION
Remove any loose dirt or dust using a damp rag. While Varathane Wood Refresher is compatible with all types of previously finished surfaces, it is not compatible with wax. To test the surface for wax, dampen a rag with mineral spirits and wipe it on the surface. If the rag pulls up a waxy substance, then the surface contains wax. To remove and dissolve the wax from the surface, dampen a rag with mineral spirits and wipe the surface until clean.
APPLICATION
Working in small sections (4x4 feet), apply in a Z pattern using a painting pad or foam style mop. Spread the Wood Refresher evenly working in the direction of the grain. Keep working in 4x4 foot sections until the entire floor is completed.
Allow the Wood Refresher to dry for 2-4 hours before applying a second coat.
Laminate Floors – Varathane No Sanding Refinishing Prep is required if you are planning to apply Varathane Wood Refresher to laminate floors.
CLEAN UP
Clean application tools and equipment with soap and water. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.