DESCRIPTION AND USES
Rust-Oleum® Professional Traffic Striping Paint is a single component, water based acrylic coating. Dries fast (in 30 minutes), and can accept traffic after 8 hours. Use for large striping jobs on interior or exterior concrete or asphalt surfaces such as large commercial parking lots, curbs, or aisles.
PRODUCT APPLICATION
SURFACE PREPARATION
ALL SURFACES: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a
detergent or other suitable cleaner. Rinse thoroughly with fresh water and allow to fully dry.
APPLICATION
Apply only when the air and surface temperatures are between 50-90 °F (10-32 °C) and the relative humidity is below 85%. The surface temperature should be at least 5 °F (3 °C) above the dew point. Protect from rain for 24 hours.
EQUIPMENT RECOMMENDATIONS
BRUSH: For quick touch-ups and small areas such as parking curbs.
ROLLER: Use a good quality, ¾ inch nap roller, the appropriate width for the stripe required.
STRIPING MACHINE: Apply by bulk striping machine. The Rust-Oleum Striping Machine (product #2395000) is not compatible.
THINNING
Thinning is not recommended. If necessary, to ease brushing or rolling, up to 5% water may be added.
CLEAN-UP
Soap and water.