READ ENTIRE LABEL BEFORE APPLYING
DESCRIPTION AND USES
Professional Inverted Marking Sprays are aerosol coatings specifically packaged for use in an inverted position as a marking paint. Use for marking construction and excavation sites, underground utilities and for traffic safety. They can also be used with the #2393000 Marking Wand to make large jobs less tedious. They feature fast dry and adhesion to concrete, blacktop, gravel, soil, and grass.
APPEARANCE
Flat to semi-gloss finish (dependent on surface porosity).
PACKAGING
15-ounce containers, 6 containers per carton
PRODUCT APPLICATION
Surface Preparation
Remove excessive loose debris from the surface before application of the coating.
Application
Apply when temperature is above 40°F (4°C) and humidity is below 85% to ensure proper drying. Protect surrounding surfaces from overspray. Overspray can carry a significant distance. Shake can vigorously for one minute after mixing ball is heard. Invert can and point at ground or floor. Hold can 4 to 10 inches above surface to be marked. Press in sideways to spray or use Rust-Oleum Marking Wand (#2393000) or Rust-Oleum Marking Pistol (#210188). Follow directions for proper use of this equipment. Keep can moving to prevent build-up. Clean valve by spraying upright for 2-3 seconds after each use. If valve clogs, carefully remove spray tip and clean in thinner. DO NOT insert any object into can valve opening.