DESCRIPTION and USE
Rust-Oleum® Wax & Tar Remover Spray is an effective, fast-acting remover for many automotive surfaces, including metal, plastic and fiberglass. It should be used prior to sanding to prolong the life of sandpaper and again after sanding as a clean-up agent prior to applying top coats. Wax & Tar Remover removes old wax build-up before reapplication of new wax to promote an even, mirror-like finish. It is also great for removing grease, silicone and road film.
PRODUCT APPLICATION
APPLICATION
Protect hands with solvent-resistant gloves and eyes with chemical splash goggles. Hold can in an upright position approximately 8-12" from surface with arrow on button pointed away from you. Apply a liberal coat and allow to stand for 1 minute and wipe dry with a clean lint-free cloth. Turn cloth frequently to ensure a clean side contacts surface. Replace cloth as necessary.
NOTE: Works on most automotive metals, plastics and fiberglass. This product may not be compatible with all surfaces and all conditions surrounding application. Before applying to any surface, always test product in a small inconspicuous area to ensure no damage will result. Do not use on freshly painted surfaces. Ensure paint has cured in accordance with paint manufacturer’s instructions. Do not use on metal or plastic surfaces that are hot to the touch. For best results, apply at temperatures between 65- 90°F (18-32°C) and avoid direct sunlight or strong breezes.