DESCRIPTION AND USES
Rust-Oleum® Wax & Tar Remover is an effective, fast-acting remover for many automotive surfaces, including metal, plastic and fiberglass. It should be used prior to sanding to prolong the life of sandpaper and again after sanding as a clean-up agent prior to applying top coats. Wax & Tar Remover removes old wax build-up before reapplication of new wax to promote an even, mirror-like finish. It is also great for removing grease, silicone and road film.
PRODUCT APPLICATION
APPLICATION
Protect hands with solvent-resistant gloves and eyes with chemical splash goggles.
Saturate a clean, lint-free cloth with Wax & Tar Remover. Thoroughly cover the area to be cleaned. Apply to a small area (3’ x 3’) at a time. Allow to stand as long as possible without drying, normally 4 to 6 minutes. Wipe dry with a clean, lint-free white cloth. Turn the cloth frequently to ensure a clean side contacts the surface. Replace cloth as it becomes damp and soiled to prevent re-depositing of contaminants.
NOTE: This product may not be compatible with all surfaces and all conditions surrounding application. Before applying to any surface, always test product in a small, inconspicuous area to ensure no damage will result. Do not use on freshly painted surfaces. Ensure paint has cured in accordance with paint manufacturer’s instructions. Do not use on metal or plastic surfaces that are hot to the touch. For best results, apply at temperatures between 65-90°F (18-32°C) and avoid direct sunlight or strong breezes.