DESCRIPTION AND USES
Rust-Oleum Automotive Premium Custom Lacquer is a premium automotive lacquer designed to give an on-trend, durable finish. The high gloss sheen provides extra shine and luster to automotive accent projects like interiors, wheels and striping. With long lasting protection and durability, an easy to apply smooth finish, and great coverage for quick project completion.
NOTE: Do not use Rust-Oleum Custom Lacquer over existing air-dried enamel paints.
PRODUCT APPLICATION
SURFACE PREPARATION
Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry.
PRIMING
Use of Rust-Oleum Stops Rust® Universal Bonding Primer #286793 provides added corrosion protection, improved adhesion and hiding. It is especially recommended for porous surfaces and bare metal.
APPLICATION
Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50°F and 90°F (10-32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces that, when heated, exceed 200°F (93°C) or galvanized metal. Avoid spraying in very windy, dusty conditions. Cover surrounding area to protect from spray mist.
Shake can vigorously for one minute after mixing ball begins to rattle. If the mixing ball fails to rattle, DO NOT STRIKE. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart. Do not use near open flame.
DRY AND RECOAT
Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 20 minutes, to handle in 1 hour, fully dry in 24 hours. Apply a second coat any time. Apply a clear top coat for maximum durability.
CLEAN UP
When finished spraying, clear spray valve by turning can upside down and pushing spray button for 5 seconds. Clean up wet paint with xylol or acetone. Throw away empty can in trash pickup. Do not burn or place in home trash compactor.
CLOGGING
If valve clogs, twist and pull off spray tip and rinse it in a solvent such as acetone. Do not stick a pin or other objects into the stem.