Description and Use
Rust-Oleum Automotive Low VOC Epoxy & Lacquer Thinner is a blended, low VOC solvent designed for use with most lacquer based wood and metal finishes. Lacquer Thinner is compatible with acrylic, epoxies, automotive or other specialty lacquers. It is suitable for thinning lacquer based paints, epoxies, and clear finishes to improve leveling and reduce viscosity without affecting clarity and gloss. Carefully read all directions, notes and cautions prior to use.
PRODUCT APPLICATION
INSTRUCTIONS
Use only with adequate ventilation. Always follow the paint manufacturer’s instructions for proper reduction ratios. Do not use more than recommended. Protect hands with solvent-resistant gloves and eyes with safety glasses. Add gradually and stir until desired consistency is obtained. Excessive amounts may decrease hiding power or cause blushing. Clean brushes and spray equipment as long as lacquer remains wet on the tools. Do not use to remove large areas of carpet adhesive, asphalt tile or carpet cement. For this use a non-flammable remover. Do not use on rubber, plastic, linoleum or synthetic bristle brushes.
NOTE: Lacquer Thinner is extremely flammable and should not be used for cleaning or degreasing large areas. If you are using this product in the workplace, read the Material Safety Data Sheet before using.